State of the Art in Accessible Pedestrian Signals

This website is

Best viewed in 800x600 or greater using:

Webpage created and maintained by Kraicat. Please mail me with any questions or comments.

Oval Bulldog

This button is a highly vandal resistant button with essentially no moving parts. It is pressure activated, but can withstand an impact from a baseball bat or hammer.

Bulldog

SPECIFICATIONS

Fits Pelco SE-2039/SE-0267 Body.

Body Material: Aluminum, Powder Coated

Colors:
- -B Black
- -G Green
- -Y Yellow
- Custom colors available
Button Material: 316 Stainless Steel

Piezo Driven Solid State Switch
- Operating Temparature: -30°F to 140°F (-34°C to 60°C)
- Operating Life: Greater than 100 million operations

BDLM2 (Momentary LED Model)
- Operating Mode: Approx. 0.1 sec flash each time button is pressed.
- Operating Voltage: 15-36V DC or 12-28V AC
- Operating Standby Current: 10µA typical (equivalent to 2MΩ at 20V)
- Luminous Intensity: Greater than 1200 mcd (ultra bright red)
- Viewing Angle: 160°

BDLL2 (Latching LED Model)
- Operating Mode: Activates only during non-walk phases and stays on until the beginning of the walk phase.
- Switch Hold Time: 6 Seconds Minimum
- Operating Voltage: 18VDC Nominal
- Requires Polara Latching Push Button Control Unit (LPBCU Sold Separately) which is installed in the intersection control cabinet.
- Luminous Intensity: Greater than 1200 mcd (ultra bright red)
- Viewing Angle: 160°

Beeper
- Sounds simultaneously with button push.
- Different tones for press and release: 2.6kHz and 2.3kHz
- Beeper uses power from existing switch wires.

ADDITIONAL OPTIONS AVAILABLE